Tile Adhesive HMG-03: Indoor and outdoor tiling solution for large format tiles, swimming pools and other outdoor areas subject to great impact from the environment.
• Super adhesion ability for large-sized tiles and stones or in harsh environments
• Specialized for areas such as bathrooms, kitchens...
• Suitable for tiling on old tile surfaces in interior areas (tile on tile).
• Add sized granite, marble, and artificial stone tiles
· Recommended for large format tiles: 600x1200mm, 800x1000mm, 1000x1000mm, 1200x1200m...
· Recommended for outdoor areas above 5 meters high
Packaging: 25kg/bag
Color: Gray/White
About the product:
· All Hoan My tile adhesive and tile grouts products use additives imported from Europe, produced according to Japanese technology lines.
· Hoan My Products is an expert in tiling solutions and waterproofing support. The product has 5 times higher adhesion than conventional products. Adhesion under standard conditions, water immersion conditions, heating conditions, and slippage.
Specifications:
· Average norm (*): ~5kg/m2
· Opening time: ~30 minutes
· Tile editing time: 5-15 minutes
· Waiting time before grouting: 24 hours
(*) Norms for reference: 5 kg/m2 with glue layer thickness of 3mm. Actual norms depend on the substrate surface, tile size and workmanship.
Expiry date and storage:
- Within 1 year from date of manufacture in original packaging and stored in a dry, ventilated area.
- If the package has been opened, it must be stored tightly sealed and kept in a dry, well-ventilated area and inspected before use.
Quality certification:
|
Chỉ tiêu thí nghiệm |
Đơn vị |
Kết quả |
Yêu cầu kỹ thuật |
Tiêu chuẩn TN |
|
Thời gian mở ≥ 0,5 N/mm2 Opening time |
Phút |
32,6 |
≥ 30 |
TCVN 7899:2008 |
|
Cường độ bám dính ở điều kiện tiêu chuẩn 28 ngày Standard conditions of adhesion strength |
N/mm2 |
1,75 |
≥ 1 |
TCVN 7899:2008 |
|
Cường độ bám dính sau khi ngâm nước Adhesion strength after soaking in water |
N/mm2 |
1,20 |
≥ 1 |
TCVN 7899:2008 |
|
Cường độ bám dính sau khi gia nhiệt Adhesion strength after heating |
N/mm2 |
1,05 |
≥ 1 |
TCVN 7899:2008 |
Product recommendation:
- Do not mix tile adhesive (mortar) with cement because it will affect the adhesion strength of the adhesive (mortar).
- Do not apply glue (mortar) to stick tiles in patches behind the tiles. This method of plastering will create gaps under the tiles and is the main cause of tile cracking, water absorption and subsequent peeling.
- Tile adhesive (mortar) mixture should be used up within the specified time. Avoid using glue (mortar) on extremely hot substrates and limit direct sunlight.